ETS-Lindgren HI-6153 Electric Field Probe - Manual (Page 51)

Battery-Operated Field Probes: HI-6022 Field Probe | 51
HI-6022 A DDITIONAL M AINTENANCE
Maintenance of the HI-6022 is limited to external components such as cables,
connectors, and probe shields. To replace the probe shields, see Probe Shield
Care and Replacement
on page 81.
Any maintenance or calibration task requires probe disassembly,
which may void your warranty. Only ETS-Lindgren service personnel
should perform these tasks. To avoid problems with your warranty,
contact ETS-Lindgren Customer Service before performing any
maintenance.
For complete information on maintenance and calibration, see Maintenance on
page 21.
HI-6022 A DDITIONAL P ARTS
Use the following table to order replacement or optional parts for the HI-6022.
Optional Part Description Part Number
Probe shield replacement Kit
includes:
 Three probe shields (cones)
 One each X, Y, and Z label
 Six screws
112955
Cable, Fiber Optic, Glass
H-491106-xx
(xx=length in meters)
Connector Set, two required
(Bulkhead Feedthrough)
H-231205000
Fiber Optic Modem, RS-232
Interface
HI-4413P
Fiber Optic to USB Converter, USB
Interface
HI-4413USB