ETS-Lindgren HI-6153 Electric Field Probe - Manual (Page 132)

132 | ETSProbe DLL User Guide
ETS_I NITIATE R EAD F IELD ()
int ETS_InitiateReadField(const int probeHandle);
Purpose: Initiates a field reading from the probe. The function
returns immediately without waiting for the operation
finish.
To determine when the operation is finished, use
ETS_IsOperationComplete. When the reading is
completed use
ETS_Field or ETS_CombinedField to
obtain the field values.
The default field units are V/m or A/m.
Return Value: Returns an integer status code. The numeric value 0
indicates successful completion.
See Status Codes on page 121 for error code
description.
Input Parameters: int probeHandle
As returned from ETS_CreateProbe function.
Output Parameters: None.