ETS-Lindgren HI-6153 Electric Field Probe - Manual (Page 140)

140 | ETSProbe DLL User Guide
ETS_S ET R ANGE ()
int ETS_SetRange(const int probeHandle, int range);
Purpose: Sets the range for the probe. The default value is 0,
which is in Auto Range. The number of ranges is
probe-dependent.
Return Value: Returns an integer status code. The numeric value 0
indicates successful completion.
See Status Codes on page 121 for error code
description.
Input Parameters: int probeHandle
Int range: Accepts values 0–5.
Output Parameters: None.