ETS-Lindgren HI-6153 Electric Field Probe - Manual (Page 55)

Battery-Operated Field Probes: HI-6053 Field Probe | 55
HI-6053 O PERATION
The HI-6053 assembly consists of a
pyramidal casing containing the
sensor, which is mounted on one
end of a shaft. The other end of the
shaft is attached to an extrusion
that houses the electronics. The
sensor and electronics housing
operate and are calibrated as a
unit.
The HI-6053 is a true 3-axis probe.
When requested, X, Y, Z, and total
field data can be reported.
The HI-6053 can be used with the
HI-6100 Field Monitor. It can also
be connected to a personal
computer using an optional
HI-4413P Fiber Optic Modem or
HI-4413USB Fiber Optic to USB
Converter and ProbeView II™
software.
For a list and description of communication and information transfer protocols,
including command structure and probe commands, see Appendix D: Operating
Protocols
on page 101.