Kontron AM5010 BIOS - Manual (Page 16)

Starting BIOS Setup AM4010/AM4011/AM5010 BIOS
Page 6 ID 1022-2060, Rev. 2.0
Note: If the AMC module is connected to a serial terminal, the <F8>, <F9> and <F10>
keys cannot be used via the serial port.
HOT KEY DESCRIPTION
F1 The <F1> key is used to display the General Help screen.
Press the <F1> key to open the General Help screen.
F10 The <F10> key is used to save any changes that have been made and exit the Setup. Press
the <F10> key to save the changes. The following screen will appear:
Press the <Enter> key to save the configuration and exit. To abort this function and return to
the previous screen, use the <Arrow> key to select Cancel and then press the <Enter> key.
ESC The <Esc> key is used to discard any changes that have been made and exit the Setup. Press
the <Esc> key to exit the Setup without saving the changes. The following screen will appear:
Press the <Enter> key to discard changes and exit. To abort this function and return to the
previous screen, use the <Arrow> key to select Cancel and then press the <Enter> key.
Enter The <Enter> key is used to display or change the function setting listed for a particular setup
item. The <Enter> key can also be used to display the setup sub-screens.