Kontron AM5010 BIOS - Manual (Page 77)

AM4010/AM4011/AM5010 BIOS Boot Setup
ID 1022-2060, Rev. 2.0 Page 67
USB DRIVES SCREEN
This screen will provide a list of USB drives if drives are installed in the system. If more than
one drive is installed, this screen also indicates the boot sequence of the drives. Furthermore,
this screen provides functions for specifying the BIOS boot order of the drives when more than
one drive is installed.
1
st
Drive, 2
nd
Drive, 3
rd
Drive, etc.
The function 1
st
Drive is used to provide generic information about the currently selected drive
if a drive is installed. If more than one drive is installed, a list of the installed drives is provided,
which allows the selection of one of the listed drives as the 1
st
Drive.
The functions 2
nd
Drive, 3
rd
Drive, etc. are only available when the respective USB drives are
installed.
SETTING DESCRIPTION
Not Installed When displayed, indicates that there are no drives installed
<generic_drive_info>
When displayed, indicates the generic drive information of the 1 st Drive
<generic_drive_info_1>
••
•
<generic_drive_info_n>
When displayed, indicates the drives installed and their current ordering for booting.
As required, use one of these settings to select a new 1
st
Drive.