Kontron AM5010 BIOS - Manual (Page 78)

Boot Setup AM4010/AM4011/AM5010 BIOS
Page 68 ID 1022-2060, Rev. 2.0
NETWORK DRIVES SCREEN
This screen indicates a list of network devices detected by the BIOS which may provide the
possibility of booting from a network drive via PXE. If more than one device is available, this
screen also indicates the boot sequence of the devices. Furthermore, this screen provides
functions for specifying the BIOS boot order of the devices when more than one is available.
1
st
Drive, 2
nd
Drive, 3
rd
Drive, etc.
The function 1
st
Drive is used to provide generic information about the currently selected device
if available. If more than one device is available, a list of the devices is provided, which allows
the selection of one of the listed devices as the 1
st
Drive.
The functions 2
nd
Drive, 3
rd
Drive, etc. are only available when the respective network devices
are available.
SETTING DESCRIPTION
Not Installed When displayed, indicates that there are no devices installed
<generic_drive_info>
When displayed, indicates the generic device information of the 1 st Drive
<generic_drive_info_1>
••
•
<generic_drive_info_n>
When displayed, indicates the devices installed and their current ordering for booting.
As required, use one of these settings to select a new 1
st
Drive.