Kontron AM5010 BIOS - Manual (Page 43)

AM4010/AM4011/AM5010 BIOS Advanced Setup
ID 1022-2060, Rev. 2.0 Page 33
Set LAN Configuration Screen
This screen provides functions to program the MMC with an IP address, a MAC address, a sub-
net mask and a gateway address. For further information concerning these settings, refer to
the IPMI 1.5 Specification, Section 19.1.
Channel Number
Channel Number Status
This is a display only function which indicates the validity of the channel number set with the
Channel Number function.
SETTING DESCRIPTION
<nn> Use this function to specify the channel number for IPMI communications. If IPMI
communicates through LAN channel 1, the channel number should remain at “01” and
so on.