Jrex plus - dc user's guide 11.2.2 jumper setting – Kontron JRexplus-DC User Manual
Page 32
Advertising
KTD-S0008-F
Page 27
EIDE Interface (P-ATA)
JRexplus-DC User's Guide
11.2.2 Jumper
Setting
Jumper J16 allows the configuration for master/slave mode.
1
Note:
1)
To protect the external power lines of peripheral devices make sure that
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.
Warning: Inserting or removing the Compact Flash card while in operation can cause serious damage and must be avoided.
Pins
Signal
1 - 2
Master
2 - 3
Slave
Advertising