12 serial-ata interface (s-ata), 1 connector, Jrex plus - dc user's guide – Kontron JRexplus-DC User Manual
Page 33
Advertising
KTD-S0008-F
Page 28
Serial-ATA Interface (S-ATA)
JRexplus-DC User's Guide
12 Serial-ATA Interface (S-ATA)
The JRexplus-DC has two S-ATA ports. Serial-ATA connections boost the data rate theoretically up to 300
MB/sec. In addition it changes the parallel interface requiring 40 separate wires to a serial interface requi-
ring only 6 wires. A RAID (Redundant Array of Independent Disks) configuration is
not possible.
12.1 Connector
The S-ATA interface is available through the standard L-type connectors J14 and J15 (7 pins).
Header
Pin
Signal Name
Function
1
GND
Ground
2
TX+
Transmit (positive)
3
TX-
Transmit (negative)
4
GND
Ground
5
RX-
Receive (negative)
6
RX+
Receive (positive)
7
GND
Ground
1
Advertising