Kontron JRexplus-DC - Manual (Page 49)

KTD-S0008-F Page 44 Setup Guide
JRexplus-DC User's Guide
22.5.2 Onboard Device Configuration Submenu
Feature Option Description
8North Bridge
Configuration
Submenu Configure the North Bridge (945GSE) features
8South Bridge
Configuration
Submenu Configure the South Bridge (ICH7M) features
8PCI Express
Configuration
Submenu Configure the PCI Express support
8IDE Configuration
Submenu Configure the IDE devices (P-ATA, S-ATA)
8Ethernet Configuration Submenu Configure the LAN controllers
8USB Configuration Submenu Configure the USB support
8SuperIO Configuration
Submenu Configure the Super-I/O (PS/2, serial and parallel port)
8Trusted Computing Submenu Configure the Trusted Computing (TPM)
22.5.2.1 North Bridge Submenu
Feature Option Description
DRAM Frequency Auto, 400 MHz
533 MHz
Define the maximum memory speed (DDR2-400 or DDR2-
533)
Configure DRAM Timing
by SPD
Disabled
Enabled
Disabled allows the manual configuration of DRAM timing
DRAM CAS# Latency 5, 4, 3 Configure the DRAM CAS latency
DRAM RAS# to CAS# Delay
DRAM RAS# Precharge
2 DRAM Clocks
3 DRAM Clocks
4 DRAM Clocks
5 DRAM Clocks
6 DRAM Clocks
7 DRAM Clocks
Configure the DRAM RAS to CAS delay and the DRAM RAS pre-
charge value
DRAM RAS# Activate to
Precharge
4 DRAM Clocks
to
15 DRAM Clocks
Configure the DRAM RAS activate to precharge value
Memory Hole Disabled
15MB-16MB
Enable or disable the memory hole at 15 MB
Chipset Thermal
Throttling
Disabled
Enabled
Enable or disable the thermal throttling. Initialize thermal
management with default trip point temperatures
DT in SPD Disabled
Enabled
Support the Delta Temperature in the DRAM SPD thermal
management algorithm
TS on DIMM Disabled
Enabled
Support the Thermal Sensor on DIMM thermal management
functionality