Kontron KISS 1U Short KTQM77 Users Guide - Manual (Page 27)

10. Maintenance and Prevention KISS 1U Short – User’s Guide (V1.10)
10.3. Cleaning the Filter Mat
The filter mat is inserted in the filter mat holder at the front side of the system. Cleaning frequency of the filter mat will
depend on the operating environment.
If the environment is extremely dusty, clean the filter mat more often. The filter mat may be changed while the system is
powered-up.
3 3 2 2
Fig. 23: Detail of the front side - Location of the filter mat
4 5 5
6 6
Fig. 24: Detail: front side without filter mat and filter mat holder
7
Fig. 25: Filter mat Fig. 26: Filter mat holder
Legend for Fig. 23, Fig. 24 and Fig. 26:
1 Front side of the KISS 1U Short
2 Filter mat
3 Filter mat holder with knurled screws
4 Tapped hole for knurled screw
5 Air intake openings
6 Positioning holes for the filter mat holder
7 Positioning lugs of the filter mat holder
To replace or clean the air filter mat, proceed as follows:
1.
Open the front access door (Fig. 6, pos. 4).
2. Loosen the knurled screw (Fig. 23, pos. 3) that secure the filter mat holder with the air filter mat to the chassis.
3. Pull out the filter mat holder (Fig. 23, pos. 3) into the marked direction.
www.kontron.com 25