Kontron KISS 1U Short KTQM77 Users Guide - Manual (Page 34)

13. Standard Interfaces – Pin Assignments KISS 1U Short – User’s Guide (V1.10)
13.
Standard Interfaces – Pin Assignments
Low-active signals are indicated by a minus sign.
13.1.1. Serial Interface COM (RS232)
Pin Signal Name 9-pin D-SUB Connector
1 DCD (Data Carrier Detect)
2 RXD (Receive Data)
3 TXD (Transmit Data)
4 DTR (Data Terminal Ready)
5 GND (Signal Ground)
6 DSR (Data Set Ready)
7 RTS (Request to Send)
8 CTS (Clear to Send)
9 RI (Ring Indicator)
13.1.2. VGA Port
Pin Signal Name 15-pin D-SUB Connector
(female)
1 Analog red output
2 Analog green output
3 Analog blue output
4 N.C.
5–8 GND
9 +5 V (DDC)
10 GND
11 N.C.
12 SDA (DDC)
13 TTL HSync
14 TTL VSync
15 SCL (DDC)
32 www.kontron.com