Kontron KISS 4U X9DR3 - Manual (Page 10)

4. General Safety Instructions for IT Equipment KISS 4U V2 EATX – User's Guide (Version 1.02)
4.
General Safety Instructions for IT Equipment
Please consider the instructions described in the supplied document “General Safety Instructions for IT
Equipment”.
Caution:
Energy hazards > 240 VA are present inside the chassis!
Activities such as system expansion with expansion cards, or maintanance have to be carried-out by
qualified personnel, aware of the associated dangers!
The installation instruction for the KISS 4U V2 EATX platform is the responsibility of the distributor.
When used as intended the KISS 4U V2 EATX platform is to operate only closed and locked.
Only when the cover is properly installed, secured with the knurled screws on the rear and the cover
fastening screw on the front, and the access panel is locked with the key, is ensured that the user doesn’t
have access to the internal parts of the KISS 4U V2 EATX platform, loaded with hazardous energy.
4.1. Operation of Laser Source Devices
Fig. 1: Laser radiation warning label
The optional DVD drives contain light-emitting diodes (classified in accordance with IEC 825-1:1993: LASER CLASS 1) and
therefore must not be opened.
If the enclosure of such a drive is opened, invisible laser radiation is emitted. Do not allow yourself to be exposed to this
radiation.
The laser system meets the code of Federal Regulations 21 CFR, 1040 for the USA and the Canadian Radiation Emitting
Devices Act, REDR C 1370.
8 www.kontron.com