Kontron KISS 4U X9DR3 - Manual (Page 28)

7. Product Description KISS 4U V2 EATX – User's Guide (Version 1.02)
7.4. Side View
Five M4 metric tapped holes are available at the left and right side of the unit (Fig. 29, pos. 2). These can be used in order
to attach slide rails [not supplied; see chapter 11 “Slide Rails (Option)”] to the KISS 4U V2 EATX platform for system
installation into a 19” industrial cabinet.
3 1 4 2 5 7 6
Fig. 29: KISS 4U V2 EATX platform – side view
1 Right side view of a KISS 4U V2 EATX platform 5 Externally accessible screw (countersunk screw
M3x6) for fastening the card hold-down bracket for
long expansion cards (full-length)
2 5x M4 tapped holes (on both sides)
3 Cover with captive knurled screws (for
mounting the cover)
6 Internal bolt for the card hold-down bracket for
short expansion cards (half-length)
4 Internal bolt for the card hold-down bracket
for long expansion cards (full-length)
7 Externally accessible screw (countersunk screw
M3x6) for fastening the card hold-down bracket for
short expansion cards (half-length)
26 www.kontron.com