Fig. 43: filter mat holder without filter mat, Fig. 44: filter mat holder with filter mat, Fig. 45: filter mat – Kontron KISS 4U X9DR3 User Manual
Page 41: Fig. 43, 5) and the two positioning latches (fig. 43, T (fig. 45) is inserted into the filter mat, Fig. 44, N slide-in module (fig. 43, Fig. 42, pos. 3) into the marked direction (see, Fig. 45)
10. Maintenance and Prevention
KISS 4U V2 EATX – User's Guide (Version 1.02)
6. After cleaning and drying the filter pad, place it in the filter mad holder (see Fig. 44).
7. Reattach the filter mat holder to the front side of the fan slide-in module by inserting the positioning latches
(Fig. 43, pos. 6) into the positioning holes (Fig. 42, pos. 3).
8. Secure the filter mat holder by tightening the knurled screws (Fig. 43, pos. 5) to the bolts with tapped holes
(Fig. 42, pos. 1) of the fan slide-in module.
Defective components may only be replaced by Kontron original spare parts.
Air filter mat: part number: 1036-5058.
1
Fig. 42: Detail: without filter mat at the front side
Fig. 43: Filter mat holder without filter mat
Fig. 44: Filter mat holder with filter mat
Fig. 45: Filter mat
Legend for Fig. 42 and Fig. 43:
1 Fan slide-in module with bolts (with tapped hole)
2 Air intake openings at the front side of the fan slide-
in module
3 Positioning holes for the filter mat holder
4 Filter mat holder
5 Knurled screw of the filter mat holder
6 Positioning latches of the filter mat holder
6
3
2
5
4
5
www.kontron.com
39