Kontron KISS 4U X9DR3 - Manual (Page 31)

8. Assembly, Disassembly KISS 4U V2 EATX – User's Guide (Version 1.02)
8.4. Accessing Internal Components
This section contains important information that you must read before accessing the internal components. You must
follow these procedures properly when handling any boards or replacing the fan slide-in module.
8.4.1. Installing/Removing the Expansion Cards
Please consider following instruction when you install (or remove) expansion cards.
When you install (or remove) expansion cards please consider the corresponding safety instruction
included in chapter 4 and the provided document “General Safety Instruction for IT Equipment”.
Activities such as working inside the system or handling the expansion cards have to be carried-out by
qualified personnel, aware of the associated dangers.
Before removing the device cover, ensure that your system is switched off and disconnected from the
mains power supply.
Caution:
Energy hazards > 240 VA are present inside the chassis!
Activities such as system expansion with expansion cards, or maintanance have to be carried-out by
qualified personnel aware of the associated dangers!
Please follow the safety instructions for components that are sensitive to electrostatic discharge (ESD).
Failure to observe this warning notice can result in damage to the device.
Please consult the documentation provided by the manufacturer of the expansion card for instructions
before attempting to install/remove an expansion card into/from your system.
www.kontron.com 29