Kontron KISS 4U X9DR3 - Manual (Page 13)

6. Scope of Delivery KISS 4U V2 EATX – User's Guide (Version 1.02)
6.
Scope of Delivery
‰ KISS 4U V2 EATX platform (ordered system configuration)
‰ Two keys for the front access panel lock
‰ Rubber feet (self-adhesive)
‰ 1x AC power cable (for system configuration with AC PSU)
‰ 2x AC Power cable (for system configuration with AC redundant PSU)
‰ General Safety Instruction for IT Equipment
Optional Parts
‰ Slide Rails (PN: 1016-5807)
‰ Rack Slide Rails Kit for KISS 1U and KISS 2U/4U V2 (PN: 1051-7200)
6.1. Type Label and Product Identification
The type label (product designation, serial number) and the inspection status label of your KISS 4U V2 EATX platform are
located on the right side of the device.
System Type Product Name Product Identifikation
KISS 4U V2 EATX KISS 4U V2 xxxxxxxx-y KISS 4U V2 EATX = system type
The “ xxxxxxxxx” group is replaced by up to a max. 8-digit
combination of numbers, letter or space, and represents the
installed CPU board
The “ y” is replaced by a single letter (A through Z) representing the
power supply installed into the system.
Note for power supplies (PSU):
A: corresponds to the systems with a 400W wide range AC power supply
B: corresponds to the systems with a 650W wide range AC power supply
C: corresponds to the systems with a 500W redundant wide range AC power supply
D: corresponds to the system configuration with a +24 VDC, 400W power supply
E: corresponds to the system configuration with a -48 VDC, 400W power supply
www.kontron.com 11