Kontron KISS 4U X9DR3 - Manual (Page 15)

7. Product Description KISS 4U V2 EATX – User's Guide (Version 1.02)
The operating elements and LED indicators are located at the front side of the KISS 4U V2 EATX platform (refer to the
subsection 7.1.2 and 7.1.3).
Two USB ports are available on the front side of the system.
Three system fans are installed at the front side of the unit. These are attached to the system by means of a fan slide-in
module. The fan slide-in module simplifies the installation and removal of these components, even during operation.
The washable filter mat, which protects your system against dust and dirt, is located on the front side of the system. This
filter mat may be replaced during operation.
The type label is attached to the right side of the device.
The system can be ordered with frontal IP52 Protection Class.
The KISS 4U V2 EATX platform may only be operated in horizontal position (rack and desktop version) or
in vertical position (tower version).
If you operate the KISS 4U V2 EATX platform in vertical position, please observe that the system fans
(slide-in module) must be to the lower front and the drives to the upper front of the system.
When powering on the KISS 4U V2 EATX system, make sure that the air intake and exhaust openings are
not obstructed by objects.
The frontal IP52 protection class for the KISS 4U V2 EATX platform is ensured only with an additional
inserted steel mesh guard, and with closed front access panel.
www.kontron.com 13