2 setting the system time and date, 57 pm – Rice Lake 920i FlexWeigh Systems - 104 User Manual
Page 12
8
System 104 Loss-in Weight Dispensing Controls
3.2
Setting the System Time and Date
Use the following steps to set up the system time and date.
1. From the
Main Setup Menu Screen
, press the
Time/Date
softkey.
Figure 3-3. Select Time/Date Softkey
2. Use the arrow keys on the 920i and the numeric keypad to modify the time and date.
3. Press the
ENTER
key to save your settings.
Figure 3-4. Time and Date Main Screen
The Cancel softkey can be pressed at any time to exit this sequence without saving any changes.
06/02/2011
02:15PM
SCALE #1
ID #1
More=>
Setup Menu
_ _ _ _ _
SCALE #1
Gross
Lb
Time/Date
Program: Express 104 PN120599 V 1.00
ID #1 (disabled)
Start
O
Disp Cmpt
ID #2 (disabled)
Resume O
Slow
Cycle
Single-Speed (enabled)
Reset O
Disp
Slow
Auto Print (disabled)
Stop
O
Disp Fast
Delay After Discharge (sec) 3.0
Setup Menu
Setup
Password
ID #2
Cancel
03:57 PM
06/02/2011
Note