Rice Lake 920i FlexWeigh Systems - 104 - Manual (Page 16)

12 System 104 Loss-in Weight Dispensing Controls
3.8 Test Digital IO
Cycle through pressing the More => softkey to access the third setup menu screen which includes the Delay After
Discharge softkey.
Press the Test Digital IO softkey to test the Dispense Complete, Slow Dispense and Fast Dispense relay outputs.
Figure 3-11. Test Digital I/O
Dispense Complete
Press the Dispense Complete softkey to test the digital I/O.
Slow Dispense
By pressing the Slow Dispense softkey, the digital I/O is tested and the Slow Dispense icon on the setup menu
screen is darkened while it’s being tested. Press the Slow Dispense softkey again and the icon clears again.
Fast Dispense
By pressing the Fast Dispense softkey, the digital I/O is tested and the Fast Dispense icon on the setup menu screen
is darkened while it’s being tested. Press the Fast Dispense softkey again and the icon clears again.
Slow Cycle
By pressing the Slow Cycle softkey, the digital I/O is tested and the Slow Cycle icon on the setup menu screen is
darkened while it’s being tested.
06/02/2011 02:19PM SCALE #1
Test
Digital IO
Exit
_ _ _ _ _
SCALE #1
Gross
Lb
<=More
Program: Express 104 PN120599 V 1.00
ID #1 (disabled) Start O Disp Cmpt
ID #2 (disabled) Resume O Slow Cycle
Single-Speed (enabled) Reset O Disp Slow
Auto Print (disabled) Stop O Disp Fast
Delay After Discharge (sec) 3.0
Setup Menu