Rice Lake 920i FlexWeigh Systems - 104 - Manual (Page 15)

Delay After Discharge 11
3.7 Delay After Discharge
Use the following steps to modify the delay after discharge.
1. Cycle through pressing the More => softkey to access the second setup menu screen which includes the
Delay After Discharge softkey.
Figure 3-9. Delay After Discharge Softkey Location
2. Press the Delay After Discharge softkey to access that softkey.
Figure 3-10. Enter Time
3. Enter in the time in seconds to delay the discharge time.
06/02/2011 02:15PM SCALE #1
Auto Print
Disabled
More=>
_ _ _ _ _
SCALE #1
Gross
Lb
<=More
Program: Express 104 PN120599 V 1.00
ID #1 (disabled) Start O Disp Cmpt
ID #2 (disabled) Resume O Slow Cycle
Single-Speed (enabled) Reset O Disp Slow
Auto Print (disabled) Stop O Disp Fast
Delay After Discharge (sec) 3.0
Setup Menu
Single-Spd
Enabled
Delay
After Disch
06/02/2011 02:15PM SCALE #1
Cancel End
_ _ _ _ _
SCALE #1
Gross
Lb
Home
Program: Express 104 PN120599 V 1.00
ID #1 (disabled) Start O Disp Cmpt
ID #2 (disabled) Resume O Slow Cycle
Single-Speed (enabled) Reset O Disp Slow
Auto Print (disabled) Stop O Disp Fast
Delay After Discharge (sec) 3.0
Setup Menu
Enter Delay After Disch (sec)
=> 3.0