Rice Lake 920i FlexWeigh Systems - 104 - Manual (Page 17)

Entering Presets Softkey Menu 13
4.0 Sequence of Operation
The following instructions explain a basic sequence of operation for the System 104.
4.1 Entering Presets Softkey Menu
The front panel E-stop button must be in the stopped position (pushed in) to enable the following keypad
entries.
The System 104 has the capability to allow the operator to modify the presets/weights. Use the following
instructions to do this.
Figure 4-1. Presets Menu Screen
1. Press the Presets softkey. The softkeys in Figure 4-2 are available.
Figure 4-2. Presets Softkey Parameters
2. Press the corresponding softkey to edit the data.
Note
- - - - -
Target Dribble Preact Dispensed
Consecutive Nbr Subtotal Total
100.0 Lb 75 0.0 500 Lb
2 0.0 Lb 0.0 Lb
Presets
Setup
Menu
Totals
06/02/2011 10:24AM SCALE #1
SCALE
#1
Gross
Lb
Actual Gross
150 Lb
- - - - -
Target Dribble Preact Dispensed
Consecutive Nbr Subtotal Total
100.0 Lb 75 0.0 500 Lb
2 0.0 Lb 0.0 Lb
Target
Weight
Exit
Slow Cycle
Time
06/02/2011 10:24AM SCALE #1
SCALE
#1
Gross
Lb
Actual Gross
150 Lb
Dribble
Weight Preact
Weight