Rice Lake 920i FlexWeigh Systems - 104 - Manual (Page 23)

Pausing/Resume/Reset a Dispense 19
4.4 Pausing/Resume/Reset a Dispense
1. Press the E-Stop button. The system turns off all outputs and displays System Paused .
2. Pressing the Resume switch will resume where the current batch left off. Pressing the Reset switch will
return back to Step 1 to allow the operator to start over.
4.5 Audit Trail Print
Record keeping is an important part of any system. The System 104 has the ability to be connected to a printer for
retaining detailed records on batches, cycle runs, cycle paused, etc.
The preferred printer to integrate with the System 104 is the TMU-220 Ticket Printer but will easily integrate with
any strip printer.
Hook up the printer to the System 104 per printer manual instructions.
Figure 4-12 illustrates several tape samples that can be printed using the System 104 and the TMU-220 tape printer.
Figure 4-12. Tape Printer Examples
Batch Stopped & Resume & Reset Print
No Extra ID Fields Running Batch Print
Sub Total Printout
Total Printout
2 Extra ID Fields Running Batch Printout