4 cable grounding, 5 parts kit contents, 6 option cards – Rice Lake 920i FlexWeigh Systems - 201/202 User Manual
Page 12
8
2.4
Cable Grounding
Cables routed through the cord grips should be grounded against the indicator enclosure. Follow cable grounding
instructions in the 920i Installation and Operation Manual (PN 67887) which is also included with this product.
2.5
Parts Kit Contents
Table 2-1. Parts Kits Contents
PN
Description
14626
Kep nuts, 8-32NC (6)
15133
Lock washers, No. 8, type A (6)
15631
Cable ties (4 single A/D, 6 dual A/D)
15665
Reducing glands for 1/2 NPT cord grips (11)
15887
6-position screw terminal for load cell connection (1-single A/D, 2-dual A/D)
19538
Cord grip plugs (10-single A/D, 9-dual A/D)
42350
Capacity Label (1-single A/D, 2-dual A/D)
53075
Cable shield ground clamps (6)
70599
6-position screw terminals for J2 and J10 (2)
71125
3-position screw terminal for J11 (1)
71126
4-position screw terminal for J9 and optional keyboard connection (2)
121108
Label, Terminal Block Identification (1)
2.6
Option Cards
The single channel A/D card can be installed in slot 1 and the 24 channel I/O card in slot 2.
Table 2-2. Option Card Locations
Slot
Type
1
Single Channel A/D Card
2
24 Channel I/O Card