Rice Lake 920i FlexWeigh Systems - 201/202 - Manual (Page 21)

Softkey Setup 17
3.9 Auto Print
When enabled this feature will print an audit trail of the actual batch process in real time.
Note
If a password is in the system, see Section 3.4 to enter the setup menu.
1. From the main setup menu screen, press More=> to access the next menu screen.
2. Press Auto Print to enable or disable the feature. The system will toggle between the two modes of
operation.
More => <=More
Dual-Spd
Enabled
0
08/27/2012 02:15PM SCALE #1
Setup Menu
0.00 SCALE
#1 Gross
Lb
PT
Auto Print
Disabled
Database
Setup
Program: Express 201/202 PN126057 Ver 1.00
ID #1 (Disabled)
ID #2 (Disabled)
Dual Speed Enabled
Auto Print Disabled
Delay After Discharge (sec) :3.0
Zero Tolerance Weight: 0.04 lb
Discharge Option Disabled
SETUP MENU
Figure 3-10. Auto Print Softkey
3.10 Database Setup
Add or delete ingredients, system can handle up to eight ingredients for a single speed feed and four ingredients for
a dual speed feed.
3.10.1 Edit Ingredients
1. From the main setup menu screen, press More=> to access the next menu screen (shown in Figure 3-5).
2. Press Database Setup .
Exit
0
08/27/2012 02:15PM SCALE #1
0.00 SCALE
#1 Gross
Lb
PT
Delete
Formulas
Edit
Ingredients
Add/Edit
Formulas
Program: Express 201/202 PN126057 Ver 1.00
ID #1 (Disabled)
ID #2 (Disabled)
Dual Speed Enabled
Auto Print Disabled
Delay After Discharge (sec) :3.0
Zero Tolerance Weight: 0.04 lb
Discharge Option Disabled
SETUP MENU
System prompt area
Figure 3-11. Database Setup Screen
3. Press Edit Ingredients .
4. The system prompts Enter Ingredient ID . Enter the ID and press Enter .