2 standard features, 3 button functions, 2 standard features 1.3 button functions – Rice Lake 920i FlexWeigh Systems - 201/202 User Manual
Page 6
2
1.2
Standard Features
The Flexweigh System 201/202 comes with the following standard features:
• Wall mount stainless steel enclosure
• Front panel switches including E-Stop, Reset/Resume, Start
• Softkeys for presets, CN#, Alpha-numeric ID#1, Alpha-numeric ID#2, and Totals
• Accumulating subtotal and total registers
• Transmitted audit trail
• Digital I/O board
• Relay rack and SSR relay outputs
- Fast feed
- Slow feed
- Fill complete (optional)
- Zero tolerance (optional)
Note
The iRite program and source code that make up the 920i Flexweigh 201/202 Basic Filler are property of the
manufacturer. Modifications to this program and equipment must be performed by Rice Lake Weighing
Systems.
and is included with this product.
1.3
Button Functions
Front panel buttons for the Flexweigh System 201/202 and their functions are described in the table listed below.
Table 1-1. Front Panel Button Functions
Front Panel Button
Function
E-Stop
Stops the filling process and removes power from the relays. It also puts the process into a
paused state.
Start
Starts the filling process.
Resume
Resumes the filling process.
Reset
Resets the current fill process.
Discharge
Available on System 202 only.