Rice Lake 920i FlexWeigh Systems - 201/202 - Manual (Page 5)

Introduction 1
1.0 Introduction
The 920i Flexweigh System 201/202 formula batching system is for filling a container that is placed on a scale. It
offers user simplicity of one-button operation and will automatically tare the empty container, automatically begin
and end filling of the container and automatically store, display and transmit each fill weight and ongoing
production accumulations. Built-in safety interlocks prevent startup of a fill cycle if an empty container is not in
place, or if the previously filled container has not been removed.
This manual is intended for use by service technicians and operators responsible for installing and operating the
920i Flexweigh System 201/202 formula batching systems. Additional information on the actual hardware features
of the 920i are explained in the 920i Installation and Operation manual (PN 67887) and is included with this
product.
1.1 Safety
Safety Symbol Definitions:
Important
CAUTION
WARNING
Indicates a potentially hazardous situation that, if not avoided could result in serious injury or death, and
includes hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided may result in minor or moderate injury.
Indicates information about procedures that, if not observed, could result in damage to equipment or
corruption to and loss of data.
Do not operate or work on this equipment unless you have read and understand the instructions and
warnings in this Manual. Failure to follow the instructions or heed the warnings could result in injury or
death. Contact any Rice Lake Weighing System dealer for replacement manuals. Proper care is your
responsibility.
General Safety
WARNING
Failure to heed may result in serious injury of death.
Some procedures described in this manual require work inside the indicator enclosure. These procedures are to be
performed by qualified service personnel only.
DO NOT allow minors (children) or inexperienced persons to operate this unit.
DO NOT operate without all shields and guards in place.
DO NOT step on the unit.
DO NOT jump up and down on the scale.
DO NOT use for purposes other then weight taking.
DO NOT place fingers into slots or possible pinch points.
DO NOT use any load bearing component that is worn beyond 5% of the original dimension.
DO NOT use this product if any of the components are cracked.
DO NOT exceed the rated load limit of the unit.
DO NOT make alterations or modifications to the unit.
DO NOT remove or obscure warning labels.
DO NOT use near water.
Before opening the unit, ensure the power cord is disconnected from the outlet.
Keep hands, feet and loose clothing away from moving parts.