Rice Lake Tracer AV - Manual (Page 8)

4 Tracer AV Installation Manual
Figure 2-2. Tracer AV (back) security cables installed after NTEP certification.
2.3 Cable Connections
The Tracer AV provides several cable connections: one for the power cord, one to accommodate the load cell,
communications, remote displays, and keypads. Figure 2-3 shows the assignments for the Tracer AV connections.
Details on pin assignments are shown in Table 2-1 through Table 2-5.
Figure 2-3. Tracer AV Power Cord Connection, DB-9 Connections, and Setup Switch Access Screw.
Remove Screw to Power Cord
Connection Access Setup Switch
DB-9 Connections