Rice Lake Contego-Hygienic Weigh Module Kits, Lateral Cable Outlet - Manual (Page 20)

Hygienic Weighing Module Contego® Installation Manual
EN-18 Sartorius
• Position the vessel on the foundation (8).
• Mark the boreholes (9) and the seating (10) (outline) of the lower plate on the foundation (8), see
figure.
Shown without upper plate and load cell
• Lift the vessel.
• Make the borings for the threaded pins/stud bolts (7).
H
without adaptor plate 35 mm
with adaptor plate 75 mm
• It is indispensable to insert the threaded pins/stud bolts (7) vertically with the required height 'H'.