Rice Lake Contego-Hygienic Weigh Module Kits, Lateral Cable Outlet - Manual (Page 7)

Installation Manual Hygienic Weighing Module Contego®
Sartorius EN-5
2.2 Mounting Aid
The auxiliary mounting plates (1) facilitate installation of the weighing module.
Remove the auxiliary
mounting plates
after mounting.
2.3 Internal Lift-Off Protector with Integrated Jack-Up
2.3.1 General Information
The Contego® Weighing Module is equipped with an internal lift-off protector, i.e. no additional borings
apart from the mounting holes in the vessel foot are required. Moreover, the vessel can be lifted by turning
the lift-off protector bolt (3) (see Chapter 2.3.2), e.g., when the weigh cell must be replaced.
Pos. Description
1
Upper plate
2 Bolt (2x)
3 Lift-off protector
4 Locknut
5 Threaded bush
6 Lower plate