5 weighing units, 6 percent weighing, Weighing units percent weighing – Rice Lake Equipoise Series, Rice Lake Weighing Systems User Manual
Page 10
6
Equipoise Series Technical Manual
3.5
Weighing Units
1. Press
in the weighing mode to change the unit of measure:
Table 3-1. Weight Unit List
Units can be set to On/Off in the parameters settings. See “Set Weighing
Unit” on page 10. If unit is set to off it will not show when pressing the
MODE key.
3.6
Percent Weighing
The balance can set a base weight to be shown as 100%. Then when other weights
are placed on the balance, it will be displayed as a percentage of the original base
weight.
For example:
1. Place base weight on the balance.
2. Press
, display will show 100.00%.
3. Remove the weight and wait for display to return to zero.
4. Place the weight you want to compare to the base weight on the platform.
The display show what percent the current weight is of the base weight.
5. The weighing may be amended on the basis of greater numbers of samples,
improves the accuracy of percentage of large quantities.
Unit Mark
Unit Name
Conversion (g)
g
gram
ct
net carat
0.2g
Lb
pound
453.59237g
OZ
ounce
28.349523125g
d
dram
1.7718451g
GN
grain
0.06479891g
OZt
troy ounce
31.1034768g
dWt
penny weight
1.55517384g
MM
momme
3.749996g
TLT
tael twn
37.49995g
TLh
tael chn
37.799375g
TLJ
troy tael
37.4290018g
t
tola
11.6638039g
bt
bangladeshi tola
1bt=11.6638039g
1bt=16Ana=96Roti
N
newton
1N=101.916g
Mode
Mode
Note
Percent