8 accumulation, 1 memory recall, 2 memory clear – Rice Lake Equipoise Series, Rice Lake Weighing Systems User Manual
Page 12: Accumulation, Memory recall memory clear
8
Equipoise Series Technical Manual
3.8
Accumulation
Before setting the balance to accumulate it should be stable (
) and the display
should be at zero ( ). Accumulation is available only when weight is more than 20
divisions (or 20 times the resolution of balance).
Accumulation Operation:
1. Place the load on the platform.
2. When the stable indicator (
) is displayed, press
.
3. Display will show ACC x (x = total number of accumulations) for three
seconds.
The total saved value will then display for three seconds.
If the optional RS-232 interface is installed the weight data will be sent to
printer.
4. Remove weight from the pan.
5. When display returns to zero and the stable (
) indicator is shown, place
another weight on balance.
6. Repeat steps 2-5 for all items to be weighed.
Display will shown ADDERR when memory is full.
3.8.1
Memory Recall
1. To recall the memory press
.
Display will show ACC x (x = total number of accumulations) for three
seconds.
The total saved value will then display for three seconds.
3.8.2
Memory Clear
To clear the memory:
1. Press .
2. While accumulation is displayed press
.
Display will return to normal display; all accumulated memory will be
cleared.
Note
Note
Sample
Sample