Rice Lake Equipoise Series, Rice Lake Weighing Systems - Manual (Page 19)

Error Codes 15
Err 8 External calibration weight error More than 4% error as linear
calibration
Err 9 Unstable, can’t perform zero or tare
Err 10 No data RS-232, continous
communication
Err 11 Won’t accept communication protocal Can get signal but can’t support
Err 12 Accumulation error Max accmulate time 999 or total
weight 999999 has been
reached.
Err 13 Lack of unit weight Counting: unit weight < 0.5d
Err 14 Lack of sample Counting: sample weight < 20d
Err 15 Error gravity value setting Gravity value range 0.96-1.04
Err 16 No paper
Err 17 Tare Operation Minus weight or overload
Err 18 Incorrect pre-tare operation Minus weight or overload
Err P Printer no response 2 seconds later
OK Set password OK
PASS Calibration OK
Fail Calibrate or password setting fail
NG RS-232 Command error
--OL- Overload Max +9d (NTEP: 105% capacity)
--LO- Minus weight -5% capacity
Bat lo Battery voltage too low <5.9v
Measuring Points Resistance
Red (+ Exc) to White ( –Exc) 420 ±20Ω
Green (+Sig) to Black ( –Sig) 350Ω ±5Ω
Error
Code Description POSSIBLE CAUSES
Table 7-1. Error Codes