0 installation, 1 unpacking, 2 charging battery – Rice Lake Equipoise Series, Rice Lake Weighing Systems User Manual
Page 7: Installation, Unpacking charging battery
Unpacking
3
2.0
Installation
2.1
Unpacking
Carefully take the balance out of its package, make it sure its not damaged and all
accessories are included.
• Remove the weighing balance from the carton.
• Remove the protective covering.
• Inspect the balance and terminal for damage.
• Make sure all components are included
Components
1. Balance
2. Adapter
3. Pan
4. Product manual
(Not Shown)
Air Protection Case
The air protection case is used to protect air variations while weighing. Available with
light capacity balances only.
1. Air Case Top Cover
2. Glass Side-1 covers x 2
3. Pole of glass
4. Glass Side-2 covers x 2
5. Carefully secure glass sides 2 & 4 with
poles.
2.2
Charging Battery
The balance can be operated by battery if desired. Battery life is approximately 40
hours.
When the battery needs to be charged the battery indicator ( ) will turn on.
• To charge the battery insert the adapter pin to jack, jack is located on the right side
of the balance.
• Plug balance into a power source. The balance does not need to be turned on. The
battery should be charged for 12 hours for full capacity.
• There is an LED to indicate the status of the battery as it is charging. When the
balance is plugged in, the internal battery will be charged.
3
1
2
1
2
3
4
+
-