Rice Lake Equipoise Series, Rice Lake Weighing Systems - Manual (Page 15)

Communications 11
3. Press to accept.
4. Press to return to weighing mode.
When battery is low, the backlight function is not available.
5.4 Communications
1. At “F3 Con”, press to enter setting.
2. Press to modify print setup
• print with print key
• print continuous
• Print automatic
3. Press to baud rate settings.
4. Press to toggle between choices.
5. Press to select printer.
6. Press to toggle between TP (tape printer) and LP-50 (not used).
7. Press to accept.
8. Press to return to weighing mode.
Zero
Print
Note
Zero
Mode
Mode
Zero
Mode
Mode
Zero
Mode
Mode
Zero
Mode
Mode