Rice Lake Intercomp CS 750 - Users Manual - Manual (Page 4)

CS750, Users
Rev R, May 2009
Page 4 of 27
Weights and Measures
The CS750 meets or exceeds class III standards for 3000
division accuracy from 300 lb to 1000 lb. The certification was
completed by the National Type Evaluation Program (NTEP)s in
accordance with the National Institute of Standards and Technology
(NIST) Handbook 44. A NTEP Certificate of Conformance Number
96-135 was issued under the National Conference of Weights and
Measures.
Optional Equipment
RS232 Serial data output (100721)
This option adds an RS232 connection so the unit may transmit a continuous output to
communicate with a computer or remote display.
LED Display (100725)
Optional LED (light emitting diode) display instead of the standard LCD (liquid crystal
display) display. An LED is fully readable in pitch-dark lighting situations.
Battery pack and 120V external charger (100730)
Rechargeable Ni-Cad battery pack (6 D-cells) with 120V external charger. Standard
power uses 6 disposable alkaline dry cells.
Battery pack and 220V external charger (100731)
Rechargeable Ni-Cad battery pack (6 D-cells) with 220V external charger. Standard
power uses 6 disposable alkaline dry cells.
Direct Power on crane unit, 120V (100723)
This option allows the CS750 to use 120V power instead of batteries.
Direct Power on crane unit, 220V (100727)
This option allows the CS750 to use 220V power instead of batteries.
Set Points, dual channel, (100792)
This option allows for 2 external set points. When the specified weight (set point) is
reached, a logic level high will be on the set point connection. Set points are used with
some other device (e.g. alarm, relay) in conjunction to the CS750.