Rice Lake Remote Displays/Scoreboards - Laser LT - Manual (Page 28)

24 Laser LT Installation and Operation Manual
3.10 Configuration with Revolution

Revolution is a user-friendly tool for configuring the Laser LT using your PC. Revolution can be used to program
and configure the Laser LT.
Revolution can be downloaded from the Rice Lake Weighing Systems web site at:www.ricelake.com/support/
software/firmware/Revolution Scale Software.
Use the following steps to configure the Laser LT using Revolution.
1. Select Revolution from the start up menu. The
following start up screen appears.
Figure 3-12. Start up Screen
2. To begin using Revolution, click New in the
File menu (see Figure 3-11 arrow). A select
indicator screen appears. Select the Laser LT to
access and press
OK .
Figure 3-13. Select Indicator
3. The chosen screen will appear as shown in
Figure 3-14.
Figure 3-14. New File Screen
There are three categories which can be
configured. They are:
• General Configuration
• Comm Ports
• Formatting
3.10.1 General
General Configuration can be set up through this tab
such as selecting the Digital I/O, locking the Learn
Mode and so on.
Figure 3-15. General Tab
Parameter settings are further explained in the
following flow charts: