Rice Lake Remote Displays/Scoreboards - Laser LT - Manual (Page 7)

Introduction 3
1.2 Annunciators
The Laser LT remote display uses a set of six designated LED annunciators (shown in Figure 1-3) and a red and
green (stop/go feature lights). The annunicators are dependent on the status character. They can also be associated
with ASCII characters (tokens) and are shown in Table 4-1 on page 25 and the default status characters are shown
in Table 3-2 on page 15.
• GR and NT annunciators are lit to show whether the displayed weight is a gross or net weight.
• lb, kg annunciators indicate the units associated with the displayed value and represent primary and secondary
units.
• 0 indicates center of zero.
• indicates a standstill condition.
GR NT lb kg
G/N
B/N
ZERO PRINT UNITS
UNITS
TARE
R e d ( s t o p )
annunciator
G r e e n ( g o )
annunciator
Figure 1-3. Front Panel Display