Rice Lake Remote Displays/Scoreboards - Laser LT - Manual (Page 37)

Appendix 31
6.3 Updating the Laser LT
If software needs to be updated for the Laser LT, the updater utility is available through Revolution.
A flash update cable (PN 115968) must be used to connect the CPU board of the Laser LT to a port on your PC.
Plug the flash update cable connector into the header TJ3 on the Laser LT CPU board and the other end into the
PC.
Figure 6-1. Flash Update Cable Plugin Location on Laser LT
Follow on screen instructions to update the Laser LT.
To access the updater, select the Update icon from the main Revolution menu and follow screen prompts.
Figure 6-2. Updater Screen for the Laser LT