Rice Lake MSI-8000 RF Remote Display - Manual (Page 11)

Introduction 7
1.4 Features
• Designed to meet or exceed all US and International safety and environmental
standards.
• Reliable and easy to use wireless remote display
• No License required. Meets US and International RF Transmission Laws.
• Greater than 24 hours operation.
• Automatic Power Off conserves battery life by sensing no activity after 15, 30, 45 or
60 minutes, determined by operator, and turns Power off.
• Rugged construction throughout. IP65 / NEMA 4 for outdoor use. Shock cushioning
on the corners.
• Six large, 1 in (26 mm) LCD digits for clear tension readings.
• Selectable for kg / lb. / Tons (US Short) / Metric Tons / kiloNewtons.
• Automatic or manual weight totalization for loading operations.
• Two Set Points can be set for any in-range tension / weight value for operator alerts or
process control.
• ScaleCore Technology providing quick and easy firmware updates and calibration /
setup backup.
• Optional Hard-wired link for applications where RF is not allowed.
1.5 FCC Statement
Contains FCC ID: OUR-XBEEPRO
The MSI-8000 complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions:
i This device may not cause harmful interference.
ii This device must accept any interference received, including interference that may
cause undesired operation.
1.6 International RF Certs
Canada Radio Cert. No.: IC: 4214A-XBEEPRO
Australia & New Zealand: AS4268:3000
Japan: Certificate of Radio Equipment in Japan No.: 08215111/AA/02
Europe and much of Asia:
The product is compliant with the following standards and/or other normative documents:
Safety (article 3.1A) EN60950-1:2001
EMC (article 3.1b) ETSI EN 301 489-1 v1.7.1 (2007-04) In accordance with the specific
requirements of ETSI EN 301 489-17 v1.2.1 (2002-08)
Spectrum (article 3.2) ETSI EN 300 328 v1.7.1 (2006-10)