Rice Lake MSI-8000 RF Remote Display - Manual (Page 38)

34 MSI-8000 Operator’s Manual
6.2 Error Codes
The ScaleCore Processor that is the heart of the MSI-8000 detects errors and generates
error codes to aid in troubleshooting.
Table 6-2. Error Codes
Error Code Definition Comment
LcOFF
LC Disabled A Load cell was not enabled
2CAL
In Cal The system is in calibration mode. Do not
send commands unrelated to calibration
unCAL
Not Calibrated System has not been calibrated
Error
LoAd
Overload Tension/Weight exceeds Set capacity
+9d, or load cell is damaged or
disconnected.
Error
UndLd
Underloaded Tension/weight is more than 20%
negative, or load cell is damaged or
disconnected.