Rice Lake Scout Pro Series Portable, Ohaus - Service Manual - Manual (Page 29)

A-1
APPENDIX A SERVICE TOOL INSTRUCTIONS
A.SERVICE TOOLS INSTRUCTIONS
This tool is required when either a main PC board or a transducer is replaced in a Scout Pro balance.
It is used to re-configure the balance to it’s old parameters in the case of a board replacement or new
parameters in the case of a transducer replacement.
A.1 REQUIREMENTS FOR SCOUT PRO TOOLS
• VGA 640x480 or higher resolution screen
• Microsoft Windows NT 4.0 or later, or Microsoft Windows 98 or later
• Scout Pro RS232 Interface Kit or USB interface Kit
• Scout Pro instruction manual
• Scout Pro Tools.zip
A.2 SOFTWARE INSTALLATION
1. If you need the software it can be downloaded at the following URL. HTTP://
fileshare.ohaus.com/docushare/.
a. Click on Login.
b. Login = ServiceA
Password = aservice
Both are case sensitive
c. Click on the Xerox logo at the upper left.
d. Click on Technical Support.
e. Click on Service Notes.
f. Click on Authorized Service Centers.
g. Click on Scout Pro Tools.
h. Download all 3 files.
2. Create a folder in the C:\ drive and name it ScoutPro. If you choose another directory you
will have to open the file toledo.ini and modify the path to the service.txt file to agree with
the folder name and path you have chosen.
3. Copy the file ScoutPro Tools.zip into C:\ScoutPro.
4. Extract the files in ScoutPro Tools.zip into C:\ScoutPro.
5. Copy the file service.txt into the C:\ScoutPro, if required.
6. You may want to put a shortcut on your desktop for easier access.