Rice Lake TradeRoute HL Series - Operation Manual (Legal-for-Trade) - Manual (Page 16)

12 TradeRoute Operator’s Manual
Pressing will place cursor at the beginning of the header line.
Pressing will place cursor at the end of the header line.
Pressing will exit to the previous menu without saving.
2.2.3 Header Setup
Up to four headers can be added to your printed ticket. Headers typically are used for
customer name, address, city/state and zip code, and phone number
1. Press . Display will show .
2. Press desired header softkey and enter information (see Section 2.2.2).
3. Repeat for each header line that requires information.
4. When all rows are done, press to return to setup menu.
2.2.4 Ticket ID
When printing a ticket, a sequential ticket ID number can be assigned.
1. Press . Display will show .
• To turn Ticket ID On/Off, press .
• To enter a Ticket ID, press and enter information (see Section 2.2.2).
2. Press to return to setup menu.
2.2.5 Truck ID
A truck ID number can be assigned and printed on each ticket.
1. Press . Display will show .
• To turn Truck ID On/Off, press .
• To set up a Truck ID, press and enter information (see Section 2.2.2).
2. Press to return to setup menu.
Note
Home
End
Cancel
Setup
Headers SOFTKEY1 SOFTKEY2 SOFTKEY3 SOFTKEY4 SOFTKEY5
Exit Header One Header Two Header Four
Header
Three
Exit
Ticket Id
SOFTKEY1 SOFTKEY2 SOFTKEY3 SOFTKEY4 SOFTKEY5
Exit On/Off
Current
Ticket
On/Off
Current
Ticket
Exit
Truck Id
SOFTKEY1 SOFTKEY2 SOFTKEY3 SOFTKEY4 SOFTKEY5
Exit On/Off Set Current
On/Off
Set Current
Exit