Rice Lake TradeRoute HL Series - Operation Manual (Legal-for-Trade) - Manual (Page 7)

Introduction 3
1.2 Overview
DO NOT place any tools under the scale. When lowered, the scale
could be damaged.
DO NOT overload the scale system. This can cause damage to the
scale and the vehicle. Always obey the weight restrictions placed
on the vehicle and roads.
1.2.1 Electronic Weigh Center
Figure 1-1 Electronic Weigh Center
The electronic weigh center houses the 920i
®
indicator and ticket printer. Figure 1-1
shows the layout of the control box. Figure 1-2 shows a close-up of the 920i indicator.
The LEDs on the outside of the control box flash when the unit is in weigh mode.
Before transporting ensure the LEDs are NOT flashing.
Throughout this section, you will be asked to press the start or stop buttons, enter key-
strokes into the indicator, or read the display.
A description of the important keys and buttons are shown on the following pages.
Important
PRINT UNITS
SOFTKEY1 SOFTKEY2 SOFTKEY3 SOFTKEY4
More=> Start
Last Weighment
Head Ct 0
Total Wt 0
Avg Wt 0
Current Weighment
Head Ct 0
Total Wt 0
Avg Wt 0
Totals:
Total Head: 0
Total Wt 0
Avg Wt 0
RICE LAKE
MODEL: 920i-20
SN: 1545613454
CLASS: III/IIIL/IIIHO
Nmax: 10 000
20 000
E
SCALE IS LEVEL Pitch = -0.0
Roll = -0.0
0
Scale
#1 Gross
lb
0
Ticket
Printer
920i Indicator
ON/OFF Switch Start Button
Stop Button
Weigh Mode Alarm LEDs
Important