Rice Lake TradeRoute HL Series - Operation Manual (Legal-for-Trade) - Manual (Page 23)

Operation 19
3.2 Batch Weighing Mode
Multi-product weighing – pick up or deliver multiple products and print weight ticket.
Requires product IDs for product being loaded or unloaded.
1. Select product ID and customer ID, if being used.
2. Insert ticket into the ticket printer.
3. Press . If no product ID has been selected the 920i will prompt,
Enter: No Product Selected
.
4. The 920i will then go into net weighing mode showing “0” weight.
5. Connect the delivery hoses. Unload or load the amount as desired. Then discon-
nect the hoses and place into storage.
The delivery hoses, chutes, conveyors, etc. should be in the storage
position before pushing the end button.
6. Stop loading or unloading. Return the delivery system to the storage position and
wait for the weight to stabilize.
7. Press . Indicator will ask:
Do You Want To Do Another Product
8. Press to enter a new product. The product ID field is cleared; if customer
ID is selected it will remain stored.
9. Press and select the product to load.
10. To continue weighing, press .
11. Repeat steps 5-10 to load all required product.
12. When last product has been loaded/unloaded, press .
13. When indicator prompts:
Do You Want To Do Another Product
, press .
Note
Start
Note
End
Yes
Product
Start
End
No