1 target option – Rice Lake TradeRoute HL Series - Operation Manual (Legal-for-Trade) User Manual
Page 22
18
TradeRoute Operator’s Manual
8. Lower the platform to disengage the scale. Visually check to see that the scale is
down completely. The cab alarm LED will turn off when the scale is in transport
mode.
3.1.1 Target Option
Single setpoint weighing – identify single target weight for delivery of product. The
relay sends a signal to turn off the pump when the target weight has been achieved.
Only available in the single weigh mode.
When selected, a target amount can be set to be loaded/unloaded.
1. Select single weigh mode. See Section 2.2.10.
2. Enter product ID and customer ID if being used.
3. Insert ticket into the ticket printer.
4. When
is pressed, indicator will prompt for a target amount to be entered.
5. Using the numerical keypad, enter required weight and press
to return to
weigh screen.
6. Unload or load the target amount.
7. Display will prompt
Press [End] Softkey
. Press
to complete ticket.
Note
Start
End