2 weigh mode alarms – Rice Lake TradeRoute HL Series - Operation Manual (Legal-for-Trade) User Manual
Page 9
Advertising
Introduction
5
1.2.2 Weigh Mode Alarms
TradeRoute
is equipped with an LED alarm to alert the operator when the scale is in
the weigh position. When in weighing mode, the LEDs will flash to indicate the load
cells are engaged, and the operator should lower the weigh modules to the transport
mode prior to transporting the scale. The alarm LEDs are located on the side of the
control box on trailer mounted units. When the scale is lowered into the transport
position the software automatically turns the alarm LEDs off.
An optional in-cab alarm LED with 35 foot cable that can be mounted in the cab is
available from Rice Lake, part number 131811.
Figure 1-3 Alarm LED Location on the
Electronic Weigh Center
Alarm LED
(Both sides)
Advertising