Sage Oracle BES980UK - Manual (Page 10)

19 20
PAge heAder..... PAge heAder..... oPErAtIng yoUr nEW APPLIAnCE
2 CUP Volume Programming
Grind, Dose and Tamp the portafilter.
Insert the portafilter into the group head.
While 2 CUP is displayed, press SELECT
dial to start espresso extraction, when
required espresso volume has been
extracted, press SELECT dial to stop
extraction. The machine will sound a long
beep to show volume has been saved.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
Shot temperature
Press SELECT dial & current temperature
will flash. Turn the SELECT dial to
required temperature & press SELECT dial
to confirm. The machine will beep once to
confirm new temperature.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
Clean Cycle
PUSH will be displayed on LCD screen.
Insert the supplied cleaning disk & a
cleaning tablet into the portafilter.
Lock portafilter into Group Head. For
further information on Clean Cycle, refer to
Care & Cleaning section on page 30.
Ensure water tank is full. Press SELECT
dial to start the Clean Cycle.
Refer to detailed cleaning section at end
of instruction booklet on page 30.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
Set Clock
Press SELECT dial to change the current
time displayed. Current time will flash.
Turn SELECT dial left or right to adjust
time as required. Turning the SELECT
dial faster or slower will change the rate of
adjustment. When required time has been
selected, press the SELECT dial to set.
Machine will beep once to confirm.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
oPErAtIng yoUr nEW APPLIAnCE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
Auto off
This function sets how long the machine
will stay turned on without any activity.
It can be set for 10mins, 30mins, 1hr,
2hrs, 3hrs, 4hrs, 5hrs, 6hrs, 7hrs or 8hrs
of inactivity time until Auto Off activates.
To change Auto Off time, press SELECT
dial, current Auto Off setting is displayed.
Rotate SELECT dial to select required time,
press SELECT dial to confirm. Machine
will beep once to confirm new setting.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
Auto Start
notE
If you try to turn Auto Start ON,
without first setting the Clock, the
machine will beep 3 times and display
the current time. If you have just
turned the machine on it will be set
to 12:00am.
Press SELECT dial to select Auto Start
time. Rotate dial to select On or OFF. Press
SELECT dial to confirm.
Rotate SELECT dial left or right to adjust
Auto Start time as required.
(PLEASE NOTE: At this point, LCD screen
may prompt you to set actual time first,
if it has not already been done - see
NOTE above).
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
Turning the SELECT dial faster or slower
will change the rate of adjustment. When
required time has been selected, press the
SELECT dial to set Auto Start ON. A small
clock icon will be displayed in the LCD
when the Auto Start function is active.