Smart Power Systems SSP UPS - Manual (Page 40)

Trouble Shooting Guide (Continue)
Problem
Cause Solution
Battery has reduced
backup time. Battery may not
able to hold a full
charge due to age. 1. Recharge the battery at
least 8 hours
2. Replace Battery
The UPS fault LED
lights on The UPS fails Save your work and turn off
equipment. Please contact
your local dealer
The UPS may be
over- loaded Check the load status Connected equipment’s
lose power while
connected to the UPS
The UPS may be
failed Please contact your local
dealer
The UPS is beeping
continuously The UPS is in fault
condition Check the audible alarms
condition table
Buttons does not work 1. The UPS is in
green mode
2. Button is
Broken
1. Wait for a while and try
again
2. Please contact your local
dealer
37